Honda H5013 Owner's Manual page 75

cl.
Install the universal shaft.
With the lock on the tractor
side fully depressed, insert the
universal shaft fully into the
P.T.O. hole.
Release the lock, pull out the
joint slowly until the lock
returns to the position shown
in the diagram.
Move the universal shaft back
and forth and check that the
lock is secure.
h
Id
Use the turnbuckle adjuster on the
right side of the lift rod to get the
attachment horizontal. After ad-
justing, secure with a lock nut.
UNlVEFiSAL SHAFT
UNIVERS(IL SHAFT
CH
ECK
LIN
K
-II-
1 cm (0.4 in)
1 IMPORTANT NOTICE 1
l
After installing the attachment, check that the lock pins are securely in
place.
l
If there is noise from the universal shaft while driving, adjust the length
of the top link slightly. If there is excessive noise from the universal
shaft when in use, damage can be caused to P.T.O. section.
l
If the check link is adjusted too tightly, it may break.
l
Use only attachment designed for use with this tractor.
73