LOADER INSTALLATION
NOTE: Install sub-frame and weights (Page
13
17).
The sub-frame, masts and main frame are
assembled. All cylinders and hoses are
attached to the loader frame and hydraulic
Move the tractor centrally between the
1.
masts.
Mount hydraulic pump to tractor by sliding
2.
splined pump drive joint onto front PTO
shaft with mounting brackets inside main
frame and attaching with four 5/16 x 7/8
inch
bolts.
Attach the front guard on the front of the
3.
sub-frame using two each 1/2 x 1 inch and
1/2 x 1 5/16 inch bolts, and four each 1/2
inch nuts and washers. Tighten bolts and
nuts.
Torque: 76 ft-lb (1
03
Nm)
LOADER INSTALLATION
37