Honda FL5540K0 Operator's Manual page 25

LOADER STAND REMOVAL
Raise the loader with the loader control
12.
until the stands clear the ground.
Remove latch pin from the stands and
13.
remove the stands.
Align the hole in the bottom of the stand
14.
with the mounting hook at rear of
mainframe. Slide the stand over the
mounting hook and then insert the latch
pin previously removed through main
frame and through the stand. Repeat the
above steps for the other side. Lower the
loader to the ground.
Front Loader is ready to become operational.
FRONT LOADER ASSEMBLY
MOUNTING HOOK
23