Honda FL5540K0 Operator's Manual page 22

FRONT LOADER ASSEMBLY
and
PRESSURE SUCTION HYDRAULIC HOSE
CONNECTION
Remove the pipe plug from the valve body
4.
and clean the threads and then install the
pressure hose. Remove the plastic caps
from the pump outlets.
threads and screw the other end (swivel
connector end) into the threaded pipe
fitting on the pump. Slide the suction hose
(large hose) over the pipe end at the
bottom of mastkeservoir and pipe end on
the pump. Attach with hose clamps and
tighten securely.
Attach the front guard on the front of the
5.
sub-frame using two each
inch bolts, and four each
inch nuts and washers.
bolts at this time.
AlTACHlNG LOADING MASTS
Move the tractor until the masts 'are
6.
positioned over the upright pads on the
sub-frame, use two
masts onto the pads and insert the fixing
pins through the masts and pads. Install
clip pins to retain fixing pins.
NOTE: Masts may have to be shaken to align
fixing pin holes.
20
Use
sealer on
inch and
Do
not tighten
people to lower the
HOSE CLAM
PUMP
FIXING PIN.
ESSURE HOSE
SUCTION HOSE