Loader Installation - Honda FL5540K1 Operator's Manual

LOADER INSTALLATION

Install the sub-frame and rear weight box.
(pages 1 1 8 )
3-
The sub-frame, masts and main frame are
assembled. All cylinders and hoses are
attached to the loader frame and hydraulic
Move the tractor centrally between the
1.
masts.
Mount hydraulic pump to tractor by sliding
2.
splined pump drive joint onto front PTO
shaft with mounting brackets inside main
frame and attaching with four 5/16 x 7/8
inch bolts.
Attach the front guard on the front o
3.
sub-frame using iwo each 1/2
x
1/2 1 5/16 inch bolts, and four each 1/2
inch nuts and washers. Tighten bolts and
nuts.
ft-lb
Torque: 76 (1
x 1 inch and
Nm)
03
LOADER INSTALLATION