Fujitsu DL7600 User Manual page 24

QUICK REFERENCE
: Operation can be performed when the printer is in this state.
— : Operation cannot be performed when the printer is in this state.
N/A: Does not apply.
Operation
Enter normal mode
Place printer offline
(Stop printing)
Place printer online
(Start printing)
Load paper
Line feed (forward)
Unload paper to park position
(both front and rear-fed
continuous forms)
Form feed (forward)
Eject single sheets
Tear off forms
(continuous forms only)
Micro feed (backward)
Micro feed (forward)
Select a direction from which cut
sheet is ejected.
Set/reset QUIET MODE.
Set/reset high impact mode
Select a paper input source
QR-2
Printer Operations (Normal Mode)
Online Offline
N/A N/A
—
—
—
—
Required Response
Turn printer on. (Press I on the power switch.)
Press ONLINE.
So that ONLINE lamp is off.
Press ONLINE.
So that ONLINE lamp lights.
Press LOAD.
Press LF/FF within three seconds.
Press LOAD.
Press and hold LF/FF until the operation starts.
Press and hold LF/FF until the operation starts.
Press TEAR OFF. Tear off forms, then press
any button to retract forms.
Press MICRO .
Press MICRO .
Press FRONT DIR.
When FRONT DIR lamp lights, cut sheet is
ejected to the front side.
When FRONT DIR lamp is off, cut sheet is
ejected to the rear side.
Press PRINT MODE.
Press HI IMPACT.
Press PAPER PATH.
User's Manual