Functional Specifications - Fujitsu DL7600 User Manual

PRINTER AND PAPER SPECIFICATIONS
FUNCTIONAL
SPECIFICATIONS
B-2
Print method
Print direction
Character cell
Letter (10 cpi):
Letter (12 cpi):
Report:
Draft:
High-speed draft:
Paper handling
Standard:
Optional:
Paper type
Paper size
Continuous Width:
Length:
Cut sheets Width:
(Paper table)
Length:
(Cut sheet feeder)
Width:
Length:
Note:
To use cut sheets, the optional paper table is required. More over, to
use cut sheets exceeding 297 mm in length, the optional large paper
table and large stacker are required. For detail see Chapter 3.
Impact dot matrix with a 0.2 mm, 24-wire head
Bidirectional logic-seeking or unidirectional
seeking
Horizontal × vertical
36 × 24 dots
30 × 24 dots
18 × 24 dots
9 × 24 dots
(MODE 1)
12 × 24 dots
(MODE 2)
9 × 24 dots
Common push tractor on front.
(Moving tractor unit to rear is possible)
Paper loading by LOAD button Advancing
perforations to tear-off edge by TEAR OFF
button
Parking continuous forms is available.
Paper Table for friction-feed (cut sheets).
Cut sheet feeder(for front or rear)
nd
Tractor unit (for 2 tractor)
1 to 5-copies for cut sheet feeder
1 to 9-copies for tractor and paper table
102-420 mm (4-16.5 in)
102 mm (4 in) or greater
55-420 mm (2.16-16.5 in)
70-420 mm (2.76-16.5 in)
100-420 mm (4-16.5 in)
70-420 mm for front cut sheet feeder
(2.76-16.5 in)
100-420 mm for front cut sheet feeder
(4-16.5 in)
User's Manual