Starting - Honda H5013 Owner's Manual

2. Descent speed adjustment
Adjust the descent speed of the cutter deck by turning the descent speed
adjust knob. Adjustment is normal if it takes l-2 seconds for the cutter
deck to lower from the highest position to the ground.
Turning the knob clockwise toward "SLOW" will decrease the speed, and
turning it counterclockwise toward FAST will increase the speed.
DESCENT SbEED ADJUST KNOB
NOTE: Uneven mowing may result if the descent speed is too slow.
3. Starting
-
1. Start the engine. Depress the clutch pedal and place the main and
auxiliary transmission levers in the desired gear range for mowing.
MAIN TRANSMISSION LEVER
I
CLUTCH PEDAL
AUXILIARY TRANSMISSION LEVER
35