4. Installation
of lift link
-
1 Pump grease through
the grease fitting to lubricate
the lift arm shaft.
Insert the lift arm shaft through
the bracket
on the main frame from
the left side. Adjust
the length of the deck lift rod to 370-372
mm
(14.6-
14.6
in), then tighten
the nut securely.
Install the deck lift
rod in the hole in the lift arm bracket.
Place the plain washer
over the
end of the deck lift rod and insert the lock in through
the end.
Recommended
Grease:
Multipurpose
Grease
PLAIN WASHER
-
LOCK PIN
DECK LIFT ROD
,
:
!'
LEFT LIFT ARM
LliT ARM SHAFT
-
2. Slide the right lift arm onto the end of the lift arm shaft.
Install the lift
arm pin through
the lift arm shaft and secure
with the lock pin.
LIFT ARM PIN
SHAFT
RIGHT LIFT ARM
16