Honda FL5540K1 Operator's Manual page 28

Front loader for honda h5518a4 multi-purpose tractor
Table of Contents

Advertisement

OPERATIONAL CHECK
OPERATING TIPS
down material with bucket cylinders partially
extended.
Cylinder and rod may be
damaged.
Do not tip bucket cutting edge down (fully
extend
bucket
and rod may be damaged.
Position vehicles to be loaded as near the pile
as possible and in such a direction as to
minimize
the amount of tractor turning
required to dump.
Do not use the spill guard to push objects as
it will deform and become damaged.
Keep the unit clean and perform regular
service.
Observe safety instructions
whenever cleaning, servicing,or lubricating.
We urge you to follow this advice:
Read and understand this manual as well
1.
as the tractor owner's manual.
Precautions brought to your attention in
this manual, the tractor manual and on the
loader itself.
Use good common sense in the everyday
3.
operation of this unit, Safety instructions
can never be all inclusive.
responsible for watching out for, and
avoiding, unsafe conditions.
Never exceed the limits of a piece of
4.
machinery. If its ability to do a job or to do
so safely is in question-Don't try it.
Don't hurry the learning process or take
5.
the unit for granted.
become familiar with your new loader and
tractor.
cylinders)
during
You are
Ease into it and
When lowering a heavy load, ease it
6.
downward slowly. Never drop a loaded
bucket and "catch" hydraulically.
Stopping a load after
downward momentum places undue
strain on the unit and may cause damage
to the loader or tractor.
- Before disconnecting
hydraulic lines, relieve all hydraulic pressure.
Escaping hydraulic oil under pressure can
have sufficient force to penetrate the skin
causing serious personal injury. If injured by
escaping hydraulic oil, consult a physician
immediately.
- Do not operate the loader if
the hydraulic fittings or hoses
damaged. A sudden line burst can cause the
main frame to drop suddenly, causing damage
to the tractor or loader or injury to personnel.
BEFORE OPERATING, LUBRICATE ALL
MOVING PARTS. (Refer to lubrication section)
COLD WEATHER OPERATION
To 'assure smooth operation in cold weather,
allow the tractor to warm up. Slowly cycle the
loader and bucket several times to warm the
fluid in the hydraulic system. The loader may
operate erratically until the hydraulic fluid has
warmed to operating temperatures.
has gained
it
are
leaking or

Advertisement

Table of Contents
loading

Table of Contents