Kenmore 318205341A Use & Care Manual page 9

Setting the Oven Controls
Setting Continuous Bake or 12 Hour Energy Saving
The and pads control the Continuous Bake or 12 Hour Energy Saving features.
The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut
off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven
can be programmed to override this feature for Continuous Baking.
To set the control for Continuous Bake or 12 Hour Energy
Saving features
1. Press and hold
(Fig. 1). "12Hr OFF" or "StAy On" will appear in the display and
the control will beep once.
2. Press to switch between the 12 Hour Energy Saving and
continuous bake features. Note: "12Hr OFF" (Fig. 2) in the
display indicates the control is set for the 12 Hour Energy Saving
mode and "StAy On" (Fig. 3) indicates the control is set for the
Continuous Bake feature.
3. Press to accept the change (Fig. 4; display will return to time
of day) or press
Setting Timer
The pad controls the Timer feature. The Timer serves as an extra timer in the kitchen
that will beep when the set time has run out. It does not start or stop cooking. The Timer
feature can be used during any of the other oven control functions. Refer to "Minimum and
Maximum Control Pad Settings" for time amount settings.
To set the Kitchen Timer (example for 5 minutes)
1. Press (Fig. 5).
2. Press the number pads to set the desired time in the display
(example 5). Press
Note: If is not pressed the timer will return to the time of day
after 25 seconds.
3. When the set time has run out, the clock will sound with 3 long
beeps every 5 seconds until
To cancel the Timer before the set time has run out
Press . The display will return to the time of day.
To Set Add 1 Minute Feature
The pad is used to set the Add 1 Minute feature. When the
feature if this feature is already active. If the Timer feature is not active and the
will become active and will begin counting down from 1 minute. For further information on how to set the Timer feature see
Setting Timer instructions above.
INSTRUCTIONS
for 7 seconds or until the control beeps once
to reject the change.
INSTRUCTIONS
. The time will begin a count down (Fig. 6).
is pressed (Fig. 7).
PRESS
for 7 seconds
or
PRESS
pad is pressed, 1 minute is added to the Timer
9
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
DISPLAY
Fig. 5
Fig. 6
Fig. 7
pad is pressed, the Timer feature