Adjusting The Oven Temperature - Kenmore 318205341A Use & Care Manual

Electric built-in oven
Table of Contents

Advertisement

Self Cleaning
When the Self-Clean Cycle is Completed
1.
The "DOOR LOCKED", "CLEAN" and "HOT" icon will remain in
the display.
2. Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven door
can then be opened.
Stopping or Interrupting a Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle due
to excessive smoke or fire in the oven:
1.
Press
.
2. Once the oven has cooled down for approximately 1 HOUR, and
the "DOOR LOCKED" icon is no longer displayed, the oven door
can then be
opened (Fig. 1).
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the oven,
be sure to follow recipe times and temperatures. If you think the oven is cooking too hot
or too cool for the temperature you select, you can adjust the actual oven temperature
to be more or less than what is displayed. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The
baking results should help you to decide how much of an adjustment is needed.
To adjust the oven temperature higher
for 6 seconds. "UPO" and degree offset will appear in
1.
Press
the display (Fig. 2).
2. To increase the temperature use the number pads to enter the
desired change (Example 30°F) 3 0 (Fig. 3). The temperature may
be increased as much as 35°F (19°C).
3. Press
to accept the temperature change and the display will
return to the time of day (Fig. 4). Press
necessary.
To adjust the oven temperature lower
for 6 seconds. "UPO" and degree offset will appear in
1.
Press
the display (Fig. 2).
2. To decrease the temperature use the number pads to enter the
desired change (Example -30°F) 3 0 and then press
The temperature may be decreased as much as 35°F (19°C).
3. Press
to accept the temperature change and the display will
return to the time of day (Fig. 4). Press
necessary.
INSTRUCTIONS
INSTRUCTIONS
to reject the change if
to reject the change if
PRESS
PRESS
3 0
or
(Fig. 5).
3 0
or
29
DISPLAY
Fig. 1
Note: The oven temperature
adjustments made with this
feature will not change
the Self-Clean cycle
temperature.
DISPLAY
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite electric built-in oven

Table of Contents