Connecting Power To The Chargebase; Charging The Main Battery; To Power A Terminal And Charge Its Main Battery - Honeywell Dolphin 70e Black User Manual

Honeywell recommends that you leave the ChargeBase connected to its power source at all times, so
that it is always ready to use.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Connecting Power to the ChargeBase

A/C Power Cord
1. Plug the A/C power cord into the power adapter.
2. Plug the power cable into the power connector on the back of the ChargeBase.
3. Plug the A/C power cord into a grounded power source.
4. The base is ready to begin charging terminals.

Charging the Main Battery

The base provides power to the Dolphin terminals and allows charging of the batteries in the terminals.
The battery of each terminal charges in 4 hours for the standard battery or 6 hours for the extended
battery. The intelligent battery charging system incorporated into all Dolphin terminals prevents
overcharging, which means that Dolphin terminals may be seated in the base indefinitely without
damage to the terminals, batteries, or the base.
For more information about Honeywell battery packs and how to check battery power level in your
terminal, refer to Power

To Power a Terminal and Charge its Main Battery

Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet
components may cause damage not covered by the warranty.
1. Install the battery in the terminal, see
2. Slide the Dolphin terminal into one of the four terminal wells. The Dock LED for the well illuminates
blue. Charging begins immediately if required by the Dolphin terminal.
Note: When the terminal is docked, the Battery Icon changes from
running on external power. Battery charging occurs in the background. When the Dolphin is removed
from the base, the battery icon indicates the charge level of the battery, see
page 2-5. For additional information on how to check the power levels of the battery, while the terminal
is docked, see
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
12 - 4
Power LED
(page 6-23) and Battery
Install the Battery
Checking Battery Power
Power Adapter
(page 3-10).
on page
on page 3-15.
Power Connector Cable
2-1.
to indicating the terminal is
Icons in the Title Bar on