Chapter 2 - Getting Started; Out Of The Box; Initial Setup For Dolphin 70E Black Terminals - Honeywell Dolphin 70e Black User Manual

2
Getting Started

Out of the Box

Verify that the carton contains the following items:
• Dolphin 70e Black mobile computer (terminal)
• 3.7V Li-ion rechargeable battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Quick start guide
• Compliance Regulatory Sheet
If you ordered accessories for your terminals, verify that they are also included with the order. Be sure to
keep the original packaging in the event that the Dolphin terminal should need to be returned for service.
Note: Your Dolphin model may differ from the model illustrated in this guide; however, the features noted are
standard for all Dolphin 70e Black models with Windows® Embedded Handheld unless otherwise indicated.

Initial Setup for Dolphin 70e Black Terminals

Step 1. Install the Battery
Note: Before installing the main battery, read the
Dolphin 70e Black model terminals are designed for use with battery part numbers BAT-STANDARD-01
(Li-ion 3.7V, 6.179 watt hour) and BAT-EXTENDED-01 (Li-ion 3.7V, 12.358 watt hour) manufactured for
Honeywell International Inc.
The terminal is shipped with the battery packaged separate from the unit. Perform the steps illustrated
below to install the battery. For information on how to remove the battery, see
on page 2-13.
Ensure all components are dry prior to placing the battery in the terminal. Mating wet components may cause
damage not covered by the warranty.
How to Install the Battery
2
Guidelines for Battery Pack Use and Disposal
1
3
on page 3-13.
Replacing the Main Battery
5
4
2 - 1