Checking Battery Power; System Resets; Hardware Maintenance; Installing A Sim Card And/Or Memory Card - Honeywell Dolphin 70e Black User Manual

Checking Battery Power

1. Touch > Settings > System
2. Touch Power to view the power status of the main battery.
Or
Touch Battery to view detailed information on the installed battery pack.
For additional information on Advanced Power Settings, see page 6-23.
For additional information on the Battery Log Configuration, see page 6-14.

System Resets

See Resetting the Terminal on page 2-14.

Hardware Maintenance

When needed, clean the image engine window and the touch screen with a clean, non-abrasive, lint-free
cloth. The terminal can be cleaned with a damp cloth.
Important - All battery and connector doors must be present, undamaged, and properly closed on the
terminal to maintain an IP54 rating.

Installing a SIM Card and/or Memory Card

SIM Card
Short for Subscriber Information Module, a SIM card stores the subscriber's personal information,
GSM/GPRS radio settings, security keys, contacts, etc. SIM cards can be installed in compatible mobile
devices, enabling you to switch devices without losing personal and setup information.
Before installing the SIM card:
• The service provider must activate the SIM card.
• The terminal must be powered Off.
Note: If no SIM card is installed, you can still make emergency phone calls (e.g., 9-1-1).
Memory Card
You can expand the terminal's memory capacity by installing a microSD or microSDHC memory card.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or microSDHC
memory cards with Dolphin terminals for maximum performance and durability. Contact a Honeywell
sales representative for additional information on qualified memory card options.
Note: Format the memory card before initial use.
3 - 15