Pause; Flash; Eypad Ock Old Only For Base ); Only For Cordless Handset ) . 25 ) - GE 28871 User Manual

6.0 telephone/answering system with cordless handset

Hide thumbs Also See for 28871:

Table of Contents

Pause

When a pause is needed to wait for a dial tone (for example, after you dial 9 for an

outside line, or to wait for a computer access tone), press the pause button to insert

a 3 second delay into the sequence when dialing (or when storing a number into

phonebook.)

Press and hold the pause button for 1.5 seconds, the screen displays a P. Each pause

counts as one digit in the dialing sequence.

Use the flash button to activate custom calling services such as call waiting or call

forwarding, which are available through your local telephone company. The screen

displays an R.

The flash button can also be used to access a new dial tone without hanging up.

Keypad Lock (only for cordless handset)

The default setting is Off.

To lock the keypad;

While phone is OFF, press and hold the #/lock/format button until a beep is heard,

the screen displays the lock icon

To unlock the keypad;

Press and hold the #/lock/format button until a beep is heard, the

longer displayed.

NOTE: When the key lock is activated, you are still able to accept

incoming calls and make emergency 911 calls.

To place a call on hold, press the hold button. Music is played as a reminder that

the call is on hold. Lift the corded handset or press the

button again to release the hold function.

NOTE: The cordless handset may pick up the call once it had been

put on hold by pressing the

speaker

button.

icon is no

button or press the hold

speaker

Table of Contents