Installing The Phone; Edestal; Lectrical ) P Ower; Attaching The Desktop Pedestal - GE 28871 User Manual

6.0 telephone/answering system with cordless handset

Hide thumbs Also See for 28871:

Table of Contents

Installing the Phone

Choose the best location to install your base and handset charge cradles. Your base

and handset charge cradle(s) should be placed on a level surface such as a desk or

table top, or you may mount the base on a wall.

Using the upper set of slots on the bottom of the base; insert the tabs and then push

the pedestal down until it snaps into place.

1. On the base, plug the AC power adaptor cord into the power jack on the back of

the base and the other into an electrical outlet.

CAUTION: To reduce risk of personal injury, fire, or damage use

only the 5-2823 (base) and 5-2824 (handset) power adaptors

listed in the user's guide. These power adaptors are intended to

be correctly orientated in a vertical or floor mount position.

. On the handset charge cradle, plug the AC power adaptor cord into the power

jack on the back of the cradle and the other into an electrical outlet.

NOTE: The charge indicator on the handset charge cradle turns on

to indicate the handset battery is charging

Table of Contents