AEG ECLIPSE 10 User Manual page 25

14.4 Message Playback
When there are new messages on the answering machine,
From the home screen, press
Press again to select "ANS. SYSTEM".
Press again to select "PLAY".
>Your messages will automatically playback through the handset's speakerphone.
>The display will show the message number and the date and time of the call.
>Press to listen to your messages privately through the earpiece of your handset.
During playback, press
REPEAT Repeat the currently playing message
NEXT Play the next message
PREVIOUS Play the previous message
DELETE Delete the current message
Note: To return to the screen showing the message number and date/time, press
Press to return to standby mode.
14.5 Delete All Messages
Note: Only old messages can be deleted. New messages must be played before they can be deleted.
From the home screen, press
Press again to select "ANS. SYSTEM".
Press to select "DELETE ALL" and then press
Press again to confirm.
>A confirmation tone is played.
Press to return to standby mode.
14.6 Announcement
When the answering system answers a call, the pre-recorded announcement is played to the caller unless
you have recorded your own announcement.
The phone comes with two pre-recorded announcements for the respective answer modes: "ANSWER
ONLY" and "RECORD MSGS". By default, the answer mode is "RECORD MSGS", which allows a caller
to leave a message on the answering machine after hearing the announcement. This can be changed to
"ANSWER ONLY" mode, which does not allow callers to leave any messages on the answering machine
after hearing the announcement.
.
and then press to access the following options:
.
flashes on the handset screen.
.
.