Table of Contents
Advertisement
You can use this diagram to cable and connect your router or follow the detailed instructions in this booklet.
1. Prepare your modem.
Unplug your modem. If it has a battery
backup, remove the battery.
2. Connect your modem.
Plug in your modem. Put the battery
back in. Then connect the modem to
the router Internet port.
DSL or Cable
Internet
Modem
3. Insert a hard disk drive (optional).
When the router is turned off, install the hard disk drive as
described in "Install an HDD (Optional)" on page 8.
Router
Power On/Off
Power On/Off
4. Power on the router.
Wait for the Power LED to turn green.
5. Connect a computer.
You can use an Ethernet cable (not
included) or connect wirelessly.
6. Launch a browser.
NETGEAR genie displays to guide you
through the installation. If you do not see
genie, type www.routerlogin.net.
Compliance
Declarations of Conformity
For complete DoC visit the NETGEAR EU Declarations of Conformity website at:
http://support.netgear.com/app/answers/detail/a_id/11621/.
This symbol is placed in accordance with the European Union
Directive 2002/96 on the Waste Electrical and Electronic Equipment
(the WEEE Directive). If disposed of within the European Union, this
product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
For indoor use only in all EU countries and Switzerland.
Advertisement
Table of Contents
