Table of Contents
Advertisement
Format the HDD from the Router Menu
You cannot partition or change the file system type when you use this
method to format the HDD.
Caution:
Formatting the hard disk drive erases any files stored on the
drive.
To format an hdd:
1.
Select ADVANCED > Storage > Advanced Settings.
2.
Click the Format Internal Hard Drive button.
Troubleshooting
If you turn off the router when an HDD is installed, wait 2 seconds
before turning it back on to give the HDD enough time to reset.
If the HDD LED is red and it used to be green, the HDD connection
could be loose. Turn off the router. Disconnect the HDD, and then
connect it again. Turn the router on and check the HDD LED.
If the browser does not display the web page:
•
Make sure that the computer is connected to one of the four LAN
Ethernet ports, or wirelessly to the router.
18
Advertisement
Table of Contents
