Install Your Router; Attach The Antennas; Prepare Your Modem - NETGEAR Nighthawk R7000 Installation Manual

Install Your Router

Make sure that your Internet service is active before you install your
router.
 To install your router:

1. Attach the antennas.

a. Align the antennas with the antenna posts on the router.
b. Attach the antennas on the threaded antenna posts.
c. Position the antennas for the best WiFi performance.
NETGEAR recommends that the center antenna be vertical
and that you aim the others outward at 45 degree angles, as
shown.

2. Prepare your modem.

a. Unplug your modem's
power.
b. If the modem has a battery
backup, remove its batteries.
c. If your modem was already
connected to another router,
disconnect the cable
between your modem and
that router.
Internet
2
DSL or cable
Modem