Add A Custom Service - NETGEAR JNR1010 User Manual

Add a Custom Service

To define a service, game, or application that does not appear in the Service Name list, first
determine which port number or range of numbers the application uses. You can usually get
this information by contacting the publisher of the application or user groups or newsgroups.

To add a custom service:
Select Advanced > Advanced Setup > Port Forwarding/Port Triggering.
1.
Select Port Forwarding as the service type.
2.
Click the Add Custom Service button to display the following screen:
3.
In the Service Name field, enter a descriptive name.
4.
In the Protocol list, select the protocol.
5.
If you are unsure, select TCP/UDP.
In the Starting Port field, enter the beginning port number, as follows:
6.
If the application uses a single port, enter the same port number in the Ending Port
•
field.
If the application uses a range of ports, enter the ending port number of the range in
•
the Ending Port field.
In the Server IP Address field, enter the IP address of your local computer that will provide
7.
this service.
Click Apply.
8.
The service appears in the list in the Port Forwarding/Port Triggering screen.
N150 4-Port Wireless Router JNR1010
Advanced Settings
74