Clearing ("Erasing") Information From A Program 3 - Hitachi VT-F462A Instruction Manual

CLEARING ("ERASING") INFORMATION FROM A PROGRAM 3

CLEARING ("ERASING") INFORMATION FROM A PROGRAM 3
1. Follow Steps 1 through 4 of "Programming the timer for unattended recording" on pages 40 and 41.
2. Press "3" button (Program Review).
3. Press "3" again if you want to view the next program information immediately.
4. Press CLEAR button when the program information you want to clear is displayed.
5. Press the GUIDE button to switch off the on-screen display.
Note: One time program is cleared automatically when the timer recording is finished, but daily and weekly
programs remain in the timer even after the timer recording is finished.
67