Vcr Plus+ Set Up For Connection C - Hitachi VT-F462A Instruction Manual

VCR Plus+ SET UP FOR CONNECTION C

ENTER OUTPUT CHANNEL
OF THE CABLE BOX
EITHER CHANNEL
*TO END PRESS
Note: If the cable box's output channel is 02, 05 or 06, press the number buttons to select the channel.
6. Press the GUIDE button to return to the original menu.
VCR Plus+ SET UP FOR CONNECTION C
If you use the cable box to receive only scrambled channels, first perform the same channel set-up
operation for Connection A, shown on page 33. This channel set-up operation allows you to by-pass the
cable box for channel reception.
To receive the scrambled channels through the cable box, use the cable box's output channel.
Example: If the VCR Plus+ channel for HBO Home Box Office is 33 and the cable box's output channel is
03.
1. Press the GUIDE button to display the menu on the TV screen.
2. Press button "6" for VCR PLUS SETUP.
IS A CABLE BOX BEING
USED WITH THE VCR
FOR ALL CHANNELS?
*TO END PRESS
3. Press button "1".
• Select "NO" because you do not receive all channels through the cable box.
VCR+ CH
------------------------------------------
01
02
PRESS CHANNEL
*TO END PRESS
4. Press the CHANNEL select button so the arrow points to the CHANNEL column next to HBO VCR
Plus+ channel 33.
03 OR 04
03
GUIDE
1 NO
2 YES
GUIDE
VCR PLUS SETUP
CHANNEL
--
--
( OR )
GUIDE
56