Table of Contents
Advertisement
VIDEO CHANNEL SETTING
VIDEO CHANNEL SETTING
The RF converter changes the video and audio signals from the tuner or tape playback, to a standard
television broadcast signal on channel 3 or 4. To obtain video recorder output on either channel 3 or 4,
set the RF converter switch to CH3 or 4 whichever channel is unused in your area.
NORMAL TV VIEWING
You do not need to disconnect VCR from your TV set to watch TV. When you turn off the POWER switch
on your VCR, the VCR automatically switches to "TV".
To watch TV, turn on TV and select a channel as usual.
24
Advertisement
Table of Contents
