Simple Alarm Sequence Configuration; Configuring The Alarm Inputs - Honeywell VideoBloX Quick Start Manual

Simple Alarm Sequence Configuration

Configuring the Alarm Inputs

Rev 1.0
The following example configures a simple sequence (event/action).
The first event turns relay #1 on when there is a contact closure on Alarm Input #1.
The second event turns Relay #1 off when there is a Contact Open on Alarm Input #1.
1. From the Configuration Program, click on the Alarms tab.
2. Click on the Alarm Inputs button.
25
7
Document 900.0840
09/06