Address The Pit - Honeywell VideoBloX Quick Start Manual

Component Connections

Address the PIT

Rev 1.0
VCL Settings
Switch #1 - Position 2 "On" all others "off"
Switch #2 - All positions "off"
Switch #3 - Position #1 and #8 - "On", all others "off"
Maxpro Mode Settings
Switch #1 - Positions 1, 2, and 3 "On"; position 4 "off"
Switch #2 - all positions off for broadcast mode
Switch #3, position 1 "on" for MAX 100/Diamond protocol
Switch #3, position 7 off; position 8 on (Slave baud rate of 19.2KB). Must be set the same
as Master port baud rate on CPU.
Switch #2, positions 5,6,7 set to off (PTZ Address 1-8).
Switch #3 positions 5, 6 set to off.
10 Document 900.0840
09/06