Video Switching; Log-On To Keyboard; Switching Cameras And Monitors; Select Monitor - Honeywell VideoBloX Quick Start Manual

Video Switching

Log-On to Keyboard

Switching Cameras and Monitors

Select Monitor

Rev 1.0
On start up, the system will require the operator to LogIn at the keyboard before
controlling any of the devices. This requires a password, which is set-up in the PC
Configuration program.
1. Press the Log In/Log Out key
2. Enter the Password (default is "0")
3. Press Enter.
Note Remove monitor #2 connection from the CPU BNC output and connect that
to Output #2 of Output Module.
There are mode keys (Camera, Monitor, DVR, and Sequence) on the HEGS5BLX
Keyboard.
Press the Monitor Key (the system is now in Monitor mode).
13
4
Document 900.0840
09/06