Setting Up Your Router For Internet Access - NETGEAR N150 Setup Manual

Setting Up Your Router for Internet Access

When configuring your wireless router manually, you must log in to your wireless router to set it
up initially and to make any changes to your wireless router's settings later.
The factory default state is reset when you use the Restore Factory Settings button.
See "Restoring the Default Password and Configuration Settings" on page 39
more information.
To access the router:
1. Type http://www.routerlogin.net in the address field of your browser, and then click Enter.
You can enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
A login window similar to the one shown in
Figure 12
2. When prompted, enter admin for the router user name and password for the router password,
both in lowercase letters. (For security reasons, the router has its own user name and
password.)
The router user name and password are not the same as any user name or
password you might use to log in to your Internet connection.
The Firmware Upgrade Assistant screen will display.
Manually Installing Your Router
Figure 12 will display.
for
17