Verifying Your Connection - NETGEAR N150 Setup Manual

Failure to start or restart your network in the correct sequence could prevent you
from accessing the Internet.
To start your network:
Plug in and turn on the cable or DSL modem. Wait 2 minutes.
1.
2. Plug the end of the power adapter's cord into the wall or a power strip, and into the power
adapter outlet of your wireless router (F), as shown in
F
Figure 10
Turn on your computer. It will take several minutes for your router to establish a connection
3.
with your computer and your Internet provider.
For DSL customers, if software logs you in to the Internet, do not run that
software. You might need to go to the Internet Explorer Tools menu, Internet
Options, Connections tab and select "Never dial a connection."

Verifying Your Connection

Verify that your router is connected correctly by checking the wireless router status lights (as
illustrated in Figure
Manually Installing Your Router
11).
Figure 10. Wait 1 minute.
15