Accessing Your Router After Installation - NETGEAR N150 Setup Manual

After connecting to the Internet, you can:
• Log in to the router and check for new firmware. Refer to the bottom label for the default login
information, or see the steps in
• Set up additional wireless computers in your network for Internet access (see
Your Wireless Network" on page
For advanced features not covered in this manual, see the User Manual on your Resource CD. A
link to the online User Manual also is available from the router interface.
The factory default state is restored when you use the restore factory settings button.
See "Restoring the Default Password and Configuration Settings" on page 39
information about this feature.

Accessing Your Router After Installation

The Smart Wizard only appears when you first install the router or when the router is in its factory
default state (for example, if you have reset the router to its default factory settings). If you want to
change the settings after installing and configuring your router using the Smart Wizard, you must
open a browser window and log in to the router. You will also be prompted to check for new router
firmware. For more information, see
Installing Your Router Using the Smart Wizard
"Configuring Your Wireless Network" on page
21).
"Configuring Your Wireless Network" on page
21.
"Configuring
for more
21.
10