General > System Logs Tab - NETGEAR Sprint 341U User Manual

Software Update
Reset
General > System Logs Tab
Technical support staff may need you to configure system logging in this tab for the purpose of
error diagnosis.
Note: You should only adjust settings in this tab under the direction of technical support staff.
1. Log in to the home page. (See
NETGEAR 341U Manager Interface
Click Check for update to see if a new version of your device's
software has been released, and if there is, download and install it. The
last time you checked is shown on the screen (Last checked at). See
Update USB Modem Software and
Note: Software downloads count against your plan's data limit.
●
Factory Reset – Click to reset your device to factory default
settings and clear your account details. See
Default Settings. (You can only do this with assistance from
Sprint.)
●
Settings Reset – Click to reset your device to factory default
settings, but leave your Sprint account details unchanged. See
Resetting Device Settings
●
Clear Programming – Click to clear your account details. See
Clearing Account Details
Logging In as an
Firmware.
Only.
Only.
Administrator.)
25
Resetting to Factory