Honeywell Galaxy 3-144 User Manual page 35

PIN + ent
45 = TIMER CONTROL
[ent] to Select
[ent] to Select
2=Holidays
[ent] to Select
2=Assign groups
STATUS A12345678
Groups
YNYYYYYN
PIN + ent
45 = TIMER CONTROL
[ent] to Select
[ent] to Select
3=Early Open
[ent] to Select
1=Early Times
Early Open
HH:MM
The groups that are affected by the programmed holiday period are
assigned using the 2=Assign groups function.
On selecting the Assign Groups option, the groups currently assigned
to the programmed holiday periods are indicated by a Y below the group;
an N is displayed below the unassigned groups. All groups default to Y.
Pressing the group number toggles the group status. When the required
groups have been assigned to the holidays, press the ent key to accept
the programming and return to the previous menu level.
NOTE:
3=Early Open
If the Early Open option (45.3.2) is enabled, the Lockout OFF time
for the following day is brought forward by the number of minutes (0 –
240) programmed by the engineer. This allows the system to be manu-
ally unset earlier than normal. There are 2 functions within this option:
The 1=Early Times function displays the time that the system can be
manually unset on the following day; this time is the Lockout OFF
Time minus the Early Open period and is displayed in the 24 hour
format.
If groups have been enabled, the early opening time for each of the
groups enabled for early opening in the Early Open option can be
viewed by pressing the A or B keys
This function only displays the early time if the Early Open option is
enabled; if this option is disabled or if no groups have been enabled, the
message NO ENTRIES is displayed.
The 2=Early Open function permits early opening to be disabled or
enabled.
If groups have been enabled, then the groups can be individually ena-
bled to permit early opening.
4=Timers
This option allows Timer A and Timer B to be switched on and off as
required. If a Timer is set to off, the operation of the Timer is sus-
pended; this option cannot be used to alter the programmed times. Both
timers default to 0 = Off. To switch the timers on, select the required
timer and change the setting to 1 =On.
The Galaxy 3-520 has more than 8 groups;
these are displayed on the keypad in blocks
of eight groups. Press A or B keys to display
each of the group blocks.
27