Max Setting Options; Setting With User Cards/Tags/Fobs; Dual Focus; Keyprox - Honeywell Galaxy 3-144 User Manual

MAX SETTING OPTIONS

Setting with User Cards/Tags/Fobs

MAX user cards/tags/fobs can be used to set the system. This is done by assigning a MAX
user card (tag or fob) with one of the setting options. When the MAX card is held against a
MAX module for five seconds, the MAX function is activated. For example, if the MAX
function assigned is 13 = Part Set, then activating the card held function results in the system
being part set.
If a user is assigned group choice, then a keypad will have to be accessed to select the group
for setting after swiping the card.

Dual Focus

If a # is assigned to a particular users pin and their max card number, then the user will have
dual focus operation. This means that they will have to enter their pin first, before setting with
the max card and vice versa.

Keyprox

A keyprox is a keypad that has a card reader built in. They are normally installed on systems
where dual focus setting and unsetting are used. Keyproxes are used as a keypad and MAX as
detailed above, but the card is held against the lower right corner of the keypad as shown in
the following diagram:
GALAXY 520 V5.00
08:58 TUE 22 NOV
A
1
2
3
B
4 5 6
9
ent
7 8
#
*
0 esc
5