Troubleshooting Tips
If you have problems using the Smart Navigator software, check these tips.
Symptom
The WGE101
doesn't show up in
the device list.
Cause
There's a hardware
problem.
Solution
•
Check that the bridge's power light
is on.
•
Check that the Ethernet cable is
securely connected to both the
computer and the bridge.
•
If operating through a switch (or
hub), check that the bridge's and
the switch's (or hub's) power lights
are on.
•
If operating through a switch (or
hub), check the Ethernet cable
connections between the computer
and the switch (or hub) and
between the bridge and switch (or
hub).
14