Selecting A Specific Wireless Network - NETGEAR WGE101 Reference Manual

Selecting a Specific Wireless Network

By default, the WGE101 connects to the wireless router or access point with the strongest
signal. This may not be the closest or the desired network. To have the bridge connect to a
specific network, you change the Network Name (SSID) setting. If you filled in the Network
Name (SSID) on page 5, you may want to refer to it for this procedure.
1. Choose Programs>NETGEAR WGE101
Bridge>Smart Navigator from the Start menu.
2. Select the bridge in the device list.
3. Click Connection Settings.
4. To connect to a specific network, select its name
in the Network Name (SSID) list.
or
Type the network's SSID in the Network Name
(SSID) box.
5. Click OK.
6. To apply the change, type admin as the User
name and the current password.
(password is the default.)
7. Click OK.
9