NETGEAR FVL328 Configuration Manual page 8

Reference Manual for the NETGEAR ProSafe VPN Client
Step-By-Step Configuration of the NETGEAR VPN Client B
Note: The NETGEAR ProSafe VPN Client has the ability to "Import" a predefined
configuration profile. The FVL328.SPD file on the NETGEAR ProSafe VPN Client
Resource CD (230-10007-01) includes all the settings identified in this procedure.
Whenever importing policy settings, you should first export any existing settings you
may have configured to prevent the new imported settings from replacing an existing
working configuration.
To import this policy, use the Security Policy Editor File menu to select Import Policy,
and select the FVL328.SPD file at D:\Software\Policies where D is the drive letter of
your CD-ROM drive.
This procedure describes linking a remote PC and a LAN. The LAN will connect to the Internet
using an FVL328 with a static IP address. The PC can be directly connected to the Internet through
dialup, cable or DSL modem, or other means, and we will assume it has a dynamically assigned IP
address.
Install the NETGEAR VPN Client Software on the PC.
1.
Note: Before installing the NETGEAR ProSafe VPN Client software, be sure to turn off
any virus protection or firewall software you may be running on your PC.
• You may need to insert your Windows CD to complete the installation.
• Reboot your PC after installing the client software.
D-8 NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
202-10015-01