NETGEAR FVL328 Configuration Manual page 7

Figure D-6: NETGEAR FVL328 VPN – Auto Policy ESP Configuration
– Select Enable Encryption in the ESP Configuration Enable Encryption checkbox. This
will also be entered in the NETGEAR ProSafe VPN Client Security Policy Key Exchange
(Phase 2) Encapsulation Protocol (ESP) checkbox, as seen in
Key Exchange (Phase 2)" on page
– From the ESP Configuration Encryption Algorithm drop-down box, select 3DES. This
will also be entered in the NETGEAR ProSafe VPN Client Security Policy Key Exchange
(Phase 2) Encrypt Alg field, as seen in
2)" on page D-13.
– Select Enable Authentication in the ESP Configuration Enable Authentication checkbox.
Note: Do not confuse this with the Authentication Protocol (AH) option. Using the AH
option will prevent clients behind a home NAT router from connecting.
– From the ESP Configuration Authentication Algorithm drop-down box, select SHA-1.
This will also be entered in the NETGEAR ProSafe VPN Client Security Policy Key
Exchange (Phase 2) Hash Alg field, as seen in
(Phase 2)" on page
– Select NETBIOS Enable in the NETBIOS Enable checkbox to enable networking
features like Windows Network Neighborhood.
Click Apply to save your changes. You will be taken back to the VPN Policies Menu page.
When the screen returns to the VPN Policies, make sure the Enable checkbox is selected.
4.
Click Apply to save your changes.
NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
Reference Manual for the NETGEAR ProSafe VPN Client
D-13.
"Connection Security Policy Key Exchange (Phase
D-13.
202-10015-01
"Connection Security Policy
"Connection Security Policy Key Exchange
D-7