NETGEAR FVL328 Configuration Manual page 6

Reference Manual for the NETGEAR ProSafe VPN Client
Figure D-5: NETGEAR FVL328 VPN – Auto Policy Traffic Selector
– From the Traffic Selector Local IP drop-down box, select Subnet addresses. This will
also be entered in the NETGEAR ProSafe VPN Client Connection Remote Party Identity
and Addressing ID Type field, as seen in
page D-9.
– Type the starting LAN IP Address of the FVL328 in the Local IP Start IP Address field.
For this example, we used 192.168.0.0 which is the default LAN IP address of the
FVL328. This will also be entered in the NETGEAR ProSafe VPN Client Connection
Remote Party Identity and Addressing Subnet field, as seen in
New Connection" on page
– Type the LAN Subnet Mask of the FVL328 (255.255.255.0 in our example) in the Local
IP Subnet Mask field. This will also be entered in the NETGEAR ProSafe VPN Client
Connection Remote Party Identity and Addressing Mask field, as seen in
Editor New Connection" on page
– From the Traffic Selector Remote IP drop-down box, select Single addresses.
– Type 0.0.0.0 as the start IP Address of the in the Remote IP Start IP Address field because
we are assuming the remote PC will have a dynamically assigned IP address. This will
also be entered in the NETGEAR ProSafe VPN Client My Identity Internal Network IP
Address field, as seen in
D-6
D-9.
D-9.
"My Identity" on page
NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
202-10015-01
"Security Policy Editor New Connection" on
D-10.
"Security Policy Editor
"Security Policy