NETGEAR FVL328 Configuration Manual page 14

Reference Manual for the NETGEAR ProSafe VPN Client
Configure the Global Policy Settings.
6.
From the Options menu at the top of the Security Policy Editor window, select Global
a.
Policy Settings.
Figure D-15: Security Policy Editor Global Policy Options
Increase the Retransmit Interval period to 45 seconds.
b.
Check the Allow to Specify Internal Network Address checkbox and click OK.
c.
Save the VPN Client Settings.
7.
From the File menu at the top of the Security Policy Editor window, select Save.
After you have configured and saved the VPN client information, your PC will automatically
open the VPN connection when you attempt to access any IP addresses in the range of the
remote VPN router's LAN.
Note: Whenever you make changes to a Security Policy, save them first, then deactivate
the security policy, reload the security policy, and finally activate the security policy.
This assures that your new settings will take effect.
D-14 NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router
202-10015-01