DESCRIPTION OF THE CONTROLS
Control panel
1. WASHING POWDER DISPENSER
ÇPrewashÈ symbol shows the compartment for the
prewash detergent.
ÇWashÈ symbol shows the compartment for the
washing detergent.
ÇsmoothÈ symbol shows the compartment for the
smoothing additives.
ÇbleachÈ symbol shows the compartment for the
bleaching additives.
2. ON/OFF LAMP
It lights when the appliance is operating.
"RINSE HOLD" BUTTON
Pressing this button together with the programs for
delicate fabrics, the water will hold up in the wash tub at
the end of the cycle. Press again to drain the water and
take out the clothes.
"1/2 LOAD BUTTON"
Pressing this button before starting the intense program
there will be one rinse less which leads to energy and water
saving.
1
2
The dispenser is
provided with 4
compartments marked
with the following
symbols:
(model FLS 431 C)
3
3. TEMPERATURE SELECTOR
This control allows you to select the temperature of the
washing cycle in accordance with the kind of clothes to be
washed.
Turn the control until the required temperature coincides
with the marker.
On the program table you will find the most apropriate
temperature for each kind of washing. Selecting
program can be run through with cold water. This will
ensure a saving in electricity consumption.
4. PROGRAM SELECTOR
To select the required program turn the control clockwise
until the marker on the top coincides with the number of the
required program (reference mark on the control panel). If
at any chance you pass by the required number NEVER
TURN THE CONTROL ANTICLOCKWISE just continue
clockwise until the required number is reached again.
4
any
17