Table of Contents
Advertisement
DESCRIPTION OF THE CONTROLS
Control panel
1
2
2
3
4
1. Washing powder dispenser
The dispenser is provided with 3 compartments
marked with the following symbols:
Prewash: symbol shows the compartment for
the prewash detergent.
Wash: symbol shows the compartment for
the washing detergent.
Smooth: symbol shows the compartment for
the smoothing additives.
2. On/of lamp
It lights when the appliance is operating.
3. Rinse hold button
The water will hold up in the wash tub at the end
of the cycle. Press again to drain the water and
take out the clothes.
4. 1/2 load button
(only for programmes 1 to 4)
Pressing this button before starting the intense
program there will be one rinse less which leads
to energy and water saving.
22
F L S - 1 0 7 3 C
5
6
7
8
9
10 11 12 13
1
2
3
4
5
5.
If your washing machine is provided with this
push button, press it to reduce the spinning
speed from 1050 to 550 r.p.m.
6. Temperature selector
This control allows you to select the temperature
of the washing cycle in accordance with the kind
of clothes to be washed.
Turn the control until the required temperature
coincides with the marker.
On the program table you will find the most
apropriate temperature for each kind of washing.
Selecting
with cold water. This will ensure a saving in
electricity consumption.
7. Program selector
To select the required program turn the control
clockwise until the marker on the top coincides
with the number of the required program
(reference mark on the control panel). If at any
chance you pass by the required number
NEVER
ANTICLOCKWISE just continue clockwise until
the required number is reached again.
6
button
any program can be run through
TURN
THE
1
7
CONTROL
Advertisement
Table of Contents
