Controls Description - Zanussi WD 2290 Instructions For The Use And Care

Washing machine & tumble dryer
Hide thumbs Also See for WD 2290:
Table of Contents

Advertisement

Operating
instructions
1. Handle dispenser
2. Drying time control knob
3. Temperature control knob
4. Special features control knob
5. Program selector control knob
6. Drying pilot lamp
7. Mains pilot lamp
Controls description
1 Handle dispenser
2 Drying Time Control Knob
The drying time can be adjusted with
this free-running selector over a wide
range of settings, up to a total of
180 minutes.
3 Temperature Control Knob
With the temperature control knob
(thermostat) you can select the washing
temperatures shown on the powder
dispenser.
This control knob is also free-
running, so that you may set to any
desired temperature, even between the
knob graduations.
4 Special Features Control Knob
This control knob has four settings
corresponding to the following
functions:
4.1 Anti-crease
The Non-Crease Feature, as explained
in the covering chapter above, can be
selected prior to starting a gentle-
action wash program (except program
«L» PURE NEW WOOL).
4.2 No-spin
By turning the control knob to this No-
Spin setting, the machine will carry out
all strong-action wash cycles without
any spinning whatsoever, which might
prove quite expedient when you wish
to wash heavily soiled robust whites in
nearly boiling water and without
spinning.
4.3 Half-load
Economy Load. This feature is for
reduced loads of clothes and saves both
electricity and water. Put up to 2 kgs -
4 lbs of normal clothes or 1 kg-2 lbs of
delicate clothes in the machine.
It is suggested that curtains or
woollens are not washed on this
programme as the low water level is
not suitable for the washing of these
types of fabrics.
6

Advertisement

Table of Contents
loading

Table of Contents