Use Of Controls - Zanussi FJ 1224/A Instruction Booklet

USE OF CONTROLS
The user must be familiar
with the machine controls
and use them correctly for
best washing results.
WASHING POWDER
DISPENSER DRAWER
The washing powder and
additives must be placed in this
drawer before starting the
programme.
There is also a brief guide to
the washing programmes on
the drawer itself.
XA UELUT oO)
By depressing this button
the machine starts operating.
When depressing it again, the
machine stops.
The push button is provided
with a child-proof safety lock.
Push the small slider placed
on the button to lock it in the
«off» position.
FAST SPIN
BUTTON 16)
Press this button when
washing cotton and linen items
to increase the spin speed from
1000 to 1200 r.p.m.
BUTTON ur]
Press this button to leave the
water in the wash tub after the
wash cycle is completed.
This works only on mixed
fabrics, wool or delicate/
synthetic programmes.
The clothes are left
suspended in water after the
final rinse to prevent the
formation of creases.
Depress the button to drain
the water.
BUTTON
Ideal for quick washing of
fabrics which are not very
dirty (programmes A -B-C -
F).
6
PROGRAMME CONTROL
To select the required
programme press the knob to
pop it out.
Turn the knob clockwise
until the marker at the top of
the dial coincides with the
required programme letter.
Press the knob again if you
wish to return it to its original
position.
ÉJ
|
It lights up when the
start/stop button is depressed
and goes out when it is pressed
again.
1: