Table of Contents
Advertisement
Manual Accuracy
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings, and
photographs of the machine we used when writ-
ing this manual. however, sometimes errors do
happen and we apologize for them.
also, owing to our policy of continuous improve-
ment, your machine may not exactly match the
manual. if you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.
before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine id label (see below). this will help us
determine if the manual version you received
matches the manufacture date of your machine.
manufacture date
of your machine
For your convenience, we post all available man-
uals and manual updates for free on our website
at www.grizzly.com. any updates to your model
of machine will be reflected in these documents
as soon as they are complete.
-2-
iNTRODUcTiON
contact info
We stand behind our machines. if you have any
service questions, parts requests or general ques-
tions about the machine, please call or write us at
the location listed below.
grizzly industrial, inc.
1203 lycoming mall Circle
muncy, pa 17756
phone: (570) 546-9663
Fax: (800) 438-5901
e-mail: techsupport@grizzly.com
if you have any comments regarding this manual,
please write to us at the address below:
grizzly industrial, inc.
/
technical documentation manager
C
o
p.o. box 2069
bellingham, Wa 98227-2069
email: manuals@grizzly.com
Machine Description
the model g0528 sliding router table allows the
woodworker to mount most routers to the table
underside with the spindle and cutter protruding
upward from the table. Similar to a shaper, the
workpiece is slid along an adjustable fence and
into the cutter. unlike a shaper, the model g0528
has a sliding table feature where the table moves
with the workpiece into the cutter. this design
improves workpiece control, especially when rout-
ing the end grain of a workpiece. For support on
both sides of the workpiece, the sliding router
table is equipped with a split-rail type fence. For
easy on/oFF control, the table has been fitted
with a router power switch.
model g0528 (mfg. 5/04+)
Advertisement
Table of Contents
