Batch Page Numbering - Sharp FO-3150 Operation Manual

Batch Page Numbering

Batch Page Numbering
You can change the page numbering of the transmitted document from simple
numbering ("P.01", "P.02", etc.) to batch numbering, which means that a slash
and the total number of pages being sent are added after each page number
(for example, "P. 01/05", "P.02/05", etc.). This allows the recipient to check for
missing pages.
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
FUNCTION
2
Press
3
Press
4
Enter the total number of pages ("01" to "99") by pressing the numeric
keys.
Example: 5 pages
5
Dial the receiving machine and send the fax.
♦
If you need to cancel a batch number entry, remove the document from the
feeder or press
♦
If the actual number of pages scanned is different from the entered number
of pages, "PAGE COUNT ERROR" will appear in the display. Transmission
will not take place if automatic dialling is used. If normal dialling is used,
transmission will begin, however, an error will occur and a transaction
report will be printed out with "PAGE E." in the NOTE column.
54
RESOLUTION/
RECEPTION MODE
to set the
once and once.
once.
0
5
STOP
.
READY TO SEND
Display:
PAGE COUNTER
ENTER # (01 - 99)