Sharp FO-3150 Operation Manual page 17

2
The drum cartridge has been installed
at the factory. Remove the protective
board from above the drum cartridge,
and then grasp the tabs on the drum
cartridge handle with both hands and
gently pull the cartridge out of the
machine. Remove the sheet of
protective paper from the cartridge and
then insert it back into the machine.
•
When removing the drum cartridge, be
careful not to the tear the paper or
leave any pieces of paper in the
machine.
3
Remove the new toner cartridge from
its packaging. Shake the cartridge side
to side four or five times to distribute
the toner evenly within the cartridge.
4
Hold the toner cartridge by the handle
with the stamped markings on the
cartridge facing upwards, and insert
the cartridge into the print
compartment.
Installing the Toner Cartridge
15