Sending A Fax By Direct Keypad Dialling - Sharp FO-3150 Operation Manual

Sending a fax by Direct Keypad Dialling

You can also enter a full number with the number keys and then press the
START
key to begin dialling.
Note: Direct Keypad Dialling cannot be used to dial a number within the same
PBX as your fax machine. To send a document to a fax machine in your PBX,
use Normal Dialling.
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
2
Enter the number of the receiving machine by pressing the number
keys.
•
If a pause is required between any of the digits to access a special service,
FUNCTION
press
Several pauses can be entered in a row.
3
Check the display. If the number of the receiving machine shown is
correct, press
•
If the number is not correct, press
at a time, and then re-enter the correct digit(s).
RESOLUTION/
RECEPTION MODE
to set the
. The pause will appear as a hyphen (four seconds per pause).
START
.
Sending a Fax by Automatic Dialling
READY TO SEND
STOP
to backspace and clear one digit
47