Makita 1806B Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Planer
  5. 1806B
  6. Instruction manual
Makita 1806B Instruction Manual

Makita 1806B Instruction Manual

Power planer
Hide thumbs Also See for 1806B:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual
Power Planer
MODEL 1806B
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
002542

Advertisement

Table of Contents
loading

Related Manuals for Makita 1806B

Summary of Contents for Makita 1806B

  • Page 1 Power Planer MODEL 1806B 002542 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    Power supply Responsible manufacturer: The tool should be connected only to a power supply of Makita Corporation Anjo Aichi Japan the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire.

  • Page 3: General Safety Rules

    GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

  • Page 4: Specific Safety Rules

    Use of the cause vibration and shorten tool life. power tool for operations different from those 16. Use only Makita blades specified in this man- intended could result in a hazardous situation. ual.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting depth of cut 002563 Depth of cut may be adjusted by simply turning the knob on the front of the tool.
  • Page 6 Handle the blades very carefully. Use gloves or rags to protect your fingers or hands when removing or installing the blades. • Use only the Makita wrench provided to remove or install the blades. Failure to do so may result in overtightening or insufficient tightening of 1. Hex wrench the installation bolts.

  • Page 7: Correct Setting

    004888 For European countries and areas When you wish to perform clean planing operation, connect a Makita vacuum cleaner to your tool. Install the nozzle on the tool using the screws. Then con- nect a hose of the vacuum cleaner to the nozzle as shown in the figures.

  • Page 8: Operation

    OPERATION Planing operation 002578 First, rest the tool front base flat upon the workpiece surface without the blades making any contact. Switch on and wait until the blades attain full speed. Then move the tool gently forward. Apply pressure on the front of tool at the start of planing, and at the back at the end of planing.
  • Page 9 To maintain product SAFETY and RELIABILITY, repairs, any other mainte- nance or adjustment should be performed by Makita Authorized Service Cent- ers, always using Makita replacement parts. 1. Brush holder cap...
  • Page 10 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 11 Memo...
  • Page 12 Makita Corporation Anjo, Aichi, Japan 883347C221...

Table of Contents