During A Call 11; Basic Functions; Camera Control; Sharing A Presentation 12 - Cisco C Series User Manual

During a Call

Basic Functions

Turn Mic on/off
Adjust the
Volume

Camera Control

During a call it is possible to change the position of your camera. If you are in a
point to point call with a compatible system, it is also possible to more the remote
camera. This is called far end camera control.
To access the camera controls, press one of the arrow buttons. Pressing an arrow
key again will start moving the camera. In addition, a range of softkeys will be
displayed a the bottom of the screen.
Camera Softkeys
Switch to a
presentation source.
Zoom the
camera in and
out.
Displays the
layout menu
11
Sharing Presentation
To share a presentation
 Locate the computer cable and connect the PC to the video system.
Connect the audio mini-jack output from the PC (or any other source) to
the mini-jack socket of the cable to get sound.
 Press the presentation button on the remote control, the default
presentation source is activated.
 If the presentation fails to show, remember that most laptops require you
to press a special key combination to switch the PC image from the PC
screen to the video screen.
If you want to send an image that is different from the default source, this can be
accomplished by selecting the presentation menu and selecting the source from
the list displayed.
12